How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to add another key. This requires the use of a handheld computer, known as Tech-2 that is operated by the dealer. Then a new car key and transponder must be purchased and then programmed into the car.
Rotate your keys to prevent one from deteriorating faster than another. This will help to keep your keys in good condition.
saab ignition key thekeylab.co.uk to the classic Saab keys of old keys, the modern key fobs have electronics inside which makes it hard to duplicate. This has made theft of cars a lot more difficult than it was a few years ago. It also makes it more costly to replace keys that were lost.
Every owner of a Saab 9-3 must have at least two working keys. It costs a fortune to replace a lost key as it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers typically charge between $100 and $200 for this.
There are ways to avoid the high cost. Some parts providers will use the code of an old key to cut a brand new metal blade at a fraction the price of the dealer. The key, however, must be identical to the original in order to function in your car.
Follow these steps to replace the case. You'll need a flathead and patience. With the screwdriver slowly tear the plastic away and separate the emergency keys from the case. Once the case is open, remove the electronics and place them inside the new case. Make sure to insert the correct badge and key back inside the case, too.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive component that can be easily and quickly replaced. Cyclone's YouTube video Cyd shows how to replace the battery of the remote fob with only four steps. This tutorial is compatible with any modern Saab key fob. However, the procedure might differ slightly.
This button is usually located near the Saab logo on the back of the fob. This is usually located just below the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver through the small hole on this button. This should be sufficient to open the case so that you can change the battery.
After you have installed the new batteries CR1632, you can reassemble the remote key fob. Then, you can program it into your car. The entire process should not be more than an hour. This is a very easy process that doesn't require any special tools.
The process is more complicated in the event that you lose your key, but still possible. The dealer will need to determine the VIN of the car and then order a new key blade and a TWICE module with the proper unique code. The dealer will then have to program the key using MDI, a new software tool.
Key Replacement Fob
The key fob contains an internal battery that is used to lock and unlock your car. The batteries have a lifespan that is a long time, and they eventually fail. This is a regular issue that occurs with all vehicles and the good thing is that you can change the batteries in most key fobs and not have to replace the whole case. Amazon sells replacement fobs with all the electronic components in place. You can simply pop the case open and replace the batteries. It's important to note that you'll have to remove the emergency key first, and you can do this by inserting an incredibly small screwdriver with a flat head into the slot located in the middle of the case. The case will split as you rotate the screwdriver around it.
If you're ready to change your keys, be sure to have a spare in your possession. This will save you lots of money. If you have spare keys, you can request that the dealer cut an additional key and program it into your car, which is cheaper than replacing the entire key fob.
If you don't have a spare, it is possible to add an additional key to your car, but this requires a lot research and effort. It costs a few hundred dollars to purchase a second car key. The computer of the car must also be programmed. Professionals can accomplish this however it's a costly option.
Replacement Ignition
In contrast to earlier Saab vehicles, the latest SAAB 9-3 models use an extremely sophisticated alarm system that is built on a key code. If you lose only one key, it could be costly to replace it with another one because the car must be equipped with a specific computer and be programmed to accept a brand new key. Most locksmiths cannot do this, and even a dealer will charge several hundred dollars just to program the new key!
Dealers will charge you top dollar to replace your car computer (also called the CIM or SAAB twice) if you lose the only working key. Instead, we can reprogram the EEPROM on your existing car computer, preparing it for an additional key, which will save you more than 50% of the amount you pay at a dealership.
If you've owned a SAAB 9-3 an extended period of time and you're aware of the ignition keys are not very durable. They can get extremely sticky, and the buttons can fall off of them from time to time and you should think about buying a new one if the one you have isn't performing as it should. It's not so difficult as it may seem to replace the ignition key. With the right tools, it is able to be accomplished quickly.